VSC43 Piezo Vacuum Transducer ● Piezo ● 1400 to 1 mbar
Utilized for computing the absolute pressure in the rough vacuum range, the VSC43 piezo vacuum transducer is compact and highly insensitive towards contamination and dirt due to its strong ceramic sensor.
DESCRIPTION
- The FKM sealing makes the ceramic sensor chemically resistant
- Highly accurate, reliable and stable
- Response time is short
- Not affected by contamination
- Compensates temperature
- Standardized, linear output signal current or voltage
- Easily connected to PLCs and other controllers of the system
- Vacuum connection over a stainless steel small flange DN 16 ISO-KF with G1/4 female thread
VARIENTS
- VSC43MA4 Vacuum Transducer ● 4-20 mA output
- VSC43MV Vacuum Transducer ● 0-10 V output
VCC200MA4 Vacuum Transducer ● 4-20 mA output
Being completely independent of gas types even below 20 mbar, and utilized for calculating absolute pressure with high accuracy, the VCC200 capitance vacuum transducer is unaffected by any dirt or contamination due to its durable ceramic sensor.
DESCRIPTION
- Superb accuracy
- High resolution
- Aluminium oxide ceramic sensor is resistant to corrosion
- Measurement is independent of gas type
- Resistant to dirt
- Robust metal housing with protection class IP54
- Vacuum connection over a stainless steel small flange DN 16 ISO-KF with G1/4 female thread
The VSP63 has a verified Thyracont impulse Pirani sensor that provides a high resolution wide measuring range. It’s a recently developed patented technology who’s advanced version – VSP64 utilizes maximum temperature compensation and has improved accuracy and stability.
DESCRIPTION
- Highly reliable and excellently reproducible
- Immensely compact to suit industrial applications
- Large measuring range with higher resolution in the range of rough vacuums
- Good resistance against oil and solvent capors is provided by the filament which is protected by a metal screen
- Precise push button digital adjustment on zero pressure and atmosphere
- Low power consumption
- Impulse mode reduces self heating of measuring chamber
- Metal sealed stainless steel sensor is ideal for UHV applications
VARIENTS
- VSP63MA4 Vacuum Transducer ● DN16KF ● 4-20 mA output
- VSP63MV Vacuum Transducer ● DN16KF ● 0-10V output
- VSP64MV Vacuum Transducer ● DN16CF-F ● 0-10 V output
VCP63 Vacuum Transducer ● Pirani ● for corrosive media ● 1000 to 1e-4 mbar
The VCP63, is highly accurate and stable due to maximum temperature compensation with its patented impulse ramp principle. It’s platinum/filament makes it an ideal choice for corrosive application in the range of fine vacuums.
DESCRIPTION
- Ideal for corrosive media
- Highly reliable
- Chemical resistance is high due to the platinum rodium filament
- Good resistance against oil and solvent vapors due to the Pirani sensor which is protected by a metal screen
- Resolution is high even in he rough vacuum range
- Precise push button digital adjustment on zero pressure and atmosphere
- Measurements are stable due to maximum temperature compensation. It is ideal for UHV applications due to the metal sealed sensor.
VSP841 / VSP842 Vacuum Sensor ● Pirani ● Passive ● 100 to 1e-3 mbar
A robust heat conduction sensor which is also of a compact size, the VSP841/42 Pirani half bridge calculates absolute pressure in the range of fine vacuums. It is temperature compensated and pre-adjusted.
Ideally used as a sensor tracking vacuum isolations and for controlled and passive bridge circuits.
DESCRIPTION
- Economical Pirani sensor
- Excellent long term stability
- Durable sensor, elastic helix filament
- Filament protected by a metal screen from condensing solvents
- Sensor is pre-adjusted
- Extremely minute sensor volume
- Screwable, electric connector
- Evaluation circuit attainable on request
VARIENTS
- VSP841 Passive Vacuum Sensor ● DN16KF
- VSP842 Passive Vacuum Sensor ● 1/8 NPT thread
VD6 Vacuum Display and Control Unit ● 1 Channel
With a relay monitor placed on the front panel, allowing continuous operation control and management of two switch points, the Thyracont VD6 universal vacuum indicator and controller is developed specially for panel mounting.
DESCRIPTION
- 2- or 3-state-control: 2 relay switch points (switch-over), adaptable over the entire range
- Intuitive operation
- Large, high-contrast LED-display
- Long table runs due to the Thyracont transducers with 4 – 20 mA signal output
- Foil-sealed front panel
- Panel mounting through DIN case 96 x 48 mm
- Process control and documentation through USB interface for
VARIENTS
- VD62P230 ● Set VD6S2230 with VSC43MA4 ● 1200 to 1 mbar
- VD64P230 ● Set VD6S2230 with VSP63MA4 ● 1000 to 1e-4 mbar
- VD6S2115 Vacuum Display and Control Unit ● 115 VAC
- VD6S2230 Vacuum Display and Control Unit ● 230 VAC
VD12 Vacuum Display And Control Unit ● 2 Channels
VD12 is an intelligent control unit suitable for applications including apparatus and plant engineering or special construction of equipments.
DECRIPTION
- Simultaneously controls 2 measuring channels
- Can be integrated with all Smartline and 0-10 V Analogline transducers
- Easy operation by menu driven operator guidance
- 2 potential-free relay switches
- Huge graphic LCD display with background illuminating
- Process documentation and setpoint programming through USB interface
- VacuGraph software: Documentation and evaluation of vacuum processes, remote control
VARIENTS
- VD122P ● Set VD12 with VSC43MV ● 1400 to 1 mbar
- VD124P ● Set VD12 with VSP63MV ● 1000 to 1e-4 mbar
- VD12S2 Vacuum Display And Control Unit